Jump to content

2195 aluminium alloy

From Wikipedia, the free encyclopedia
(Redirected from 2195 aluminum alloy)

2195 aluminium alloy is an alloy in the wrought aluminium-copper family (2000 or 2xxx series). It is one of the Weldalite family of Aluminium–lithium alloys.[1] It is one of the most complex grades in the 2000 series, with at least 91.9% aluminium by weight. 2195 aluminium can be alternately referred to by the UNS designation A92195.

Properties

[edit]

Like most other aluminium-copper alloys, 2195 is a high-strength alloy, with bad workability, and poor corrosion resistance. Being highly alloyed, it tends to fall on the higher strength and lower corrosion resistance side. As a wrought alloy, it is not used in casting. It can be welded, particularly by friction stir welding, and is fracture resistant at cryogenic temperatures.[1]

Applications

[edit]

The high strength to weight ratio of this alloy has resulted in its aerospace applications such as the Space Shuttle Super Lightweight external tank.[1] It is 30 % stronger and 5 % less dense than the 2219 alloy used in the original Space Shuttle external tank.[1]

2195 is used for the propellant tanks of the Falcon 9 Full Thrust orbital launcher,[2][3] and for the new ULA Vulcan first stage.[citation needed]

Chemical Composition

[edit]

The alloy composition of 2195 aluminium is:[4][5]

References

[edit]
  1. ^ a b c d Super Lightweight External Tank, NASA, retrieved 12 Dec 2013.
  2. ^ "How Light Metals Help SpaceX Land Falcon 9 Rockets with Astonishing Accuracy". Light Metal Age. 26 April 2019. Archived from the original on 28 August 2023. Retrieved 9 May 2024.
  3. ^ "Falcon 9". SpaceX. 2013. Archived from the original on 24 September 2013. Retrieved 2013-12-06.
  4. ^ Häusler, Ines; Schwarze, Christian; Bilal, Muhammad; Ramirez, Daniela; Hetaba, Walid; Kamachali, Reza; Skrotzki, Birgit (2017). "Precipitation of T1 and θ′ Phase in Al-4Cu-1Li-0.25Mn During Age Hardening: Microstructural Investigation and Phase-Field Simulation". Materials. 10 (2) 117. doi:10.3390/ma10020117. ISSN 1996-1944. PMC 5459132. PMID 28772481.
  5. ^ "2195 Aluminum Composition Spec". www.matweb.com. Retrieved 2024-02-18.

Aluminium alloy table

[edit]